产品banner
Your current location : Home >> News >> Company news

Contact us

CHINA JIANGSU JUWEI MACHINERY CO.,LTD

Add:Western industrial Park, Dongtai City, Jiangsu Province, China

ZIP:224217

TEL:+86-515-85422299

FAX:+86-515-85422399

HOT LINE:+86 13661556708

WEB:www.jwhammer.cn

           www.jsjuwei.cn

EMAIL:jwjx@jsjuwei.cn

How to avoid high temperature alarm for piling hammer?

2019-08-09

打桩锤厂家


After entering the summer, the continuous weather is much hot. In such extreme temperature, the excavator should be careful to make money and minimize working in high temperature period such as noon. The piling hammer manufacturer should pay attention to the safety inspection and maintenance of the vehicle together to prevent internal injury to the excavator


Excavators are the same as people. They have to suffer from the erosion of summer heat flow over the years. During the whole process of operation, the temperature of the excavator increases with the increase of outdoor working temperature, which belongs to all normal conditions. When encountering high temperature, it must be solved properly, so as not to cause damage to the excavator, Next, I will share with you some reasonable steps to reduce temperature and water temperature


01, "reduce load, low speed ratio", reduce heat release


Turn off the main lock and put the accelerator pedal in. When running at a low speed, the load will be reduced and the speed ratio will be reduced. The heat generated by the friction of various fitness sports parts will be relatively reduced, which will indirectly reduce the heat generated by the digestion and absorption of the refrigerant, thus reducing the rate of temperature rise


04. Expand the inlet and exhaust air volume of water storage tank and accelerate heat dissipation of heat pipe


Open the cold doors on both sides of the excavator, so that the air volume of the heat pipe radiator will increase, and the skin temperature can be quickly distributed, thus reducing the rate of temperature rise


08. Add antifreeze immediately after the temperature drops


After the temperature drops, check whether there is a lack of automobile antifreeze. If there is no reserved automobile antifreeze beside you, you can add "mineral water or purified water in use", and do not add river or surface water. The proposal is to apply IHI special automobile antifreeze. Do not mix the antifreeze from different manufacturers or famous brands


4. After the temperature drops, clean the heat pipe radiator


After the temperature drops down, check whether there is too much dust between the heat pipe radiator, cooler and water storage tank. Use high-pressure gas valve to completely clean up the dust between the water storage tank and the water storage tank to ensure that the water storage tank and the cooler have excellent heat pipe heat dissipation characteristics. In fact, 90% of the high temperature of the excavator is caused by the poor heat dissipation of the heat pipe, It is a unique skill to clean up the dirt on the surface of the heat pipe radiator and the internal dirt and oil stain completely.



Label

Last viewed:

Contact Information

jiang su Office

1.png   Add: Western industrial Park, Dongtai City, Jiangsu Province

3.png  ZIP:224217

2.png   TEL:+86-515-85422299

首页底部联系 图标 传真.png  FAX: +86-515-85422399

2.png  HOT LINE:+86 13661556708

首页底部联系 图标 网址.png  WEB :www.jwhammer.cn

                  www.jsjuwei.cn

3.png  EMAIL: jwjx@jsjuwei.cn


Copyright © CHINA JIANGSU JUWEI MACHINERY CO.,LTD Service support:yangtian network
sitemap | RSS | XML